Different Types of Roofing and Ways to Inspect Them

Unless you spend a lot of time higher than your building, you are not likely to think much about the state of your roof. But an out of sight, out of mind attitude to this part of your building maintenance could end up costing big bucks. A problem with a roof is always best sorted out early. But, getting to repairs sooner rather than later, depends on how often you look.

How Often to Inspect Your Roof

Irrespective of your location, your roof is going to be exposed to a variety of elements and over time, it will develop roofing problems. Therefore, it makes great sense to do a quick self-inspection every now and then to ensure everything is still fine. If you’re going to do it yourself, be sure to take the proper safety measures if you need to climb a ladder for a closer look. While you should do it more often, you should inspect your roof at least twice a year. You may want to do it in the fall long before the worst of the winter weather sets in and again in the spring after the snow. 

While inspecting, look for patches of moss, standing water, loose shingles or any other signs of damage. Also, look for any signs of blistering, rust or cracking. Also check the inside the roof space for mold and mildew or vermin. If you notice something that could be an issue, be sure to seek advice as quickly as possible by contacting an expert such as the guys found on commercialroofsystems.net.

Types of Roofing and Potential Problems

There are several kinds of roofs and roofing materials, but no matter which you choose, they all are going to experience issues over time – perhaps some more than others. Here’s what to look out for when checking the main types of roofing systems.

Flat Commercial Roofing: These roofs don’t come have a slope or any kind of gradation. This makes vulnerable to ponding – this when water pools in one spot. Also, look for the presence of any other weak points such as blistering or holes forming in the roofing membrane. Include a  check your drainage and ensure there is nothing blocking downspouts and guttering, one of the main causes of damp.

Sloped Commercial Roof:  If you have this type of roof, it may be made from tiles, asphalt shingle, metal or slate. Sometimes shingles look fine from a distance but a closer inspection could reveal signs of bending, curling, blistering or cracking. Call in an expert if you notice any of these signs. Spotting these issues early could save you from having to replace a whole roof in one go.

Commercial Metal Roof: Metal roofing requires little maintenance. Still, it is a good idea to check it periodically for any cracks and dents. Check especially for loose flashing. It more likely to be the cause of any problems.

No matter what shape your roof is or what kind of material it’s made from, it’s an integral part of the building. Any issues that let in vermin, water or high winds in could compromise the entire building’s structure and safety. Prevention is always better than a cure but if you don’t fancy going up a ladder, try checking local regulations to see if you can use a drone to get a good look. Or better still, use the eyes of an expert and call in a roofing professional to take a quick look. 



Speak Your Mind